<?php
// *************************************************************************
// *                                                                       *
// * iBilling -  Accounting, Billing Software                              *
// * Copyright (c) Sadia Sharmin. All Rights Reserved                      *
// *                                                                       *
// *************************************************************************
// *                                                                       *
// * Email: sadiasharmin3139@gmail.com                                                *
// * Website: http://www.sadiasharmin.com                                  *
// *                                                                       *
// *************************************************************************
// *                                                                       *
// * This software is furnished under a license and may be used and copied *
// * only  in  accordance  with  the  terms  of such  license and with the *
// * inclusion of the above copyright notice.                              *
// * If you Purchased from Codecanyon, Please read the full License from   *
// * here- http://codecanyon.net/licenses/standard                         *
// *                                                                       *
// *************************************************************************
_auth();
$ui->assign('_title', $_L['Utilities'].'- '. $config['CompanyName']);
$ui->assign('_st', $_L['Utilities']);
$ui->assign('_application_menu', 'util');
$action = $routes['1'];
$user = User::_info();
$ui->assign('user', $user);
switch ($action) {

    case 'activity':


        $ui->assign('xjq', '
	 $("#clear_logs").click(function (e) {
        e.preventDefault();
        bootbox.confirm("This will delete all logs older than 30 days. Are you sure?", function(result) {
           if(result){
               var _url = $("#_url").val();
               $.get( _url+"util/clear_logs", function( data ) {
location.reload();
});
           }
        });
    });

 ');

        $paginator = Paginator::bootstrap('sys_logs');
        $d = ORM::for_table('sys_logs')->offset($paginator['startpoint'])->limit($paginator['limit'])->order_by_desc('date')->find_many();
        $ui->assign('d',$d);
        $ui->assign('paginator',$paginator);


        $ui->display('util-activity.tpl');
        break;

    case 'ajax_logs':

        $table = 'sys_logs';

// Table's primary key
        $primaryKey = 'id';

// Array of database columns which should be read and sent back to DataTables.
// The `db` parameter represents the column name in the database, while the `dt`
// parameter represents the DataTables column identifier. In this case simple
// indexes
        $df = $config['df'].' H:i:s';

        $columns = array(
            array( 'db' => 'id', 'dt' => 0 ),
            array(
                'db'        => 'date',
                'dt'        => 1,
                'formatter' => function( $d, $row) {
                    global $df;
                    return date( $df, strtotime($d));


                }
            ),
            array( 'db' => 'type',   'dt' => 2 ),
            array( 'db' => 'description',     'dt' => 3 ),
            array( 'db' => 'userid',     'dt' => 4 ),
            array( 'db' => 'ip',     'dt' => 5 ),

        );

// SQL server connection information
        $sql_details = array(
            'user' => $db_user,
            'pass' => $db_password,
            'db'   => $db_name,
            'host' => $db_host
        );


        /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
         * If you just want to use the basic configuration for DataTables with PHP
         * server-side, there is no need to edit below this line.
         */

        // require( 'ssp.class.php' );

        $dt = Ssp::simple( $_GET, $sql_details, $table, $primaryKey, $columns );
        $x= json_encode(
            $dt
        );

        echo $x;

        break;

    case 'clear_logs':
        $b30 = date('Y-m-d H:i:s',strtotime('-30 days', time()));
        $d = ORM::for_table('sys_logs')
            ->where_lte('date', $b30)
            ->delete_many();
        _msglog('s',$_L['Logs has been deleted']);

        break;


    case 'sent-emails':

        $paginator = Paginator::bootstrap('sys_email_logs');
        $d = ORM::for_table('sys_email_logs')->offset($paginator['startpoint'])->limit($paginator['limit'])->order_by_desc('date')->find_many();
        $ui->assign('d',$d);
        $ui->assign('paginator',$paginator);


        $ui->display('util-sent-emails.tpl');
        break;

    case 'cronlogs':

        $paginator = Paginator::bootstrap('sys_schedulelogs','','','','','','','','',5);
        $d = ORM::for_table('sys_schedulelogs')->offset($paginator['startpoint'])->limit($paginator['limit'])->order_by_desc('date')->find_many();
        $ui->assign('d',$d);
        $ui->assign('paginator',$paginator);


        $ui->display('util_cron_logs.tpl');
        break;

    case 'ajax_sent-emails':

        $table = 'sys_email_logs';
        $df = $config['df'].' H:i:s';
// Table's primary key
        $primaryKey = 'id';

// Array of database columns which should be read and sent back to DataTables.
// The `db` parameter represents the column name in the database, while the `dt`
// parameter represents the DataTables column identifier. In this case simple
// indexes
        $columns = array(
            array( 'db' => 'id', 'dt' => 0 ),
            array(
                'db'        => 'date',
                'dt'        => 1,
                'formatter' => function( $d, $row) {
                    global $df;
                    return date( $df, strtotime($d));


                }
            ),

            array( 'db' => 'email',     'dt' => 2 ),
            array( 'db' => 'subject',     'dt' => 3 ),
            array(
                'db'        => 'id',
                'dt'        => 4,
                'formatter' => function( $d, $row ) {
                    //  return date( 'jS M y', strtotime($d));
                    //
                    return '<a href="'.U.'util/view-email/'.$d.'/" class="btn btn-primary btn-outline btn-xs"><i class="fa fa-envelope-o"></i> View</a>';
                }
            )

        );

// SQL server connection information
        $sql_details = array(
            'user' => $db_user,
            'pass' => $db_password,
            'db'   => $db_name,
            'host' => $db_host
        );


        /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
         * If you just want to use the basic configuration for DataTables with PHP
         * server-side, there is no need to edit below this line.
         */

        // require( 'ssp.class.php' );

        $x= json_encode(
            Ssp::simple( $_GET, $sql_details, $table, $primaryKey, $columns )
        );
        //  Dev::_log($x);
        header('Content-Type: application/json');
        echo $x;

        break;




    case 'dbstatus':
        $dbc = new mysqli($db_host,$db_user ,$db_password,$db_name);
        if ($result = $dbc->query('SHOW TABLE STATUS')) {
            $size = 0;
            $decimals = 2;
            $tables = array();
            while($row = $result->fetch_array()){
                $size += $row["Data_length"] + $row["Index_length"];
                $total_size = ($row[ "Data_length" ] + $row[ "Index_length" ]) / 1024;
                $tables[$row['Name']]['size'] = number_format($total_size,'0');
                $tables[$row['Name']]['rows'] = $row[ "Rows" ];
                $tables[$row['Name']]['name'] = $row[ "Name" ];
            }

            $mbytes = number_format($size/(1024*1024),$decimals,$config['dec_point'],$config['thousands_sep']);

            $ui->assign('tables',$tables);
            $ui->assign('dbsize',$mbytes);
            $ui->display('dbstatus.tpl');

        }
        break;

    case 'dbbackup':

        try {
            // open the connection to the database - $host, $user, $password, $database should already be set
            $mysqli = new mysqli($db_host,$db_user ,$db_password,$db_name);

            // did it work?
            if ($mysqli->connect_errno) {
                throw new Exception("Failed to connect to MySQL: " . $mysqli->connect_error);
            }

            header('Pragma: public');
            header('Expires: 0');
            header('Cache-Control: must-revalidate, post-check=0, pre-check=0');
            header('Content-Type: application/force-download');
            header('Content-Type: application/octet-stream');
            header('Content-Type: application/download');
            header('Content-Disposition: attachment;filename="backup_'.date('Y-m-d_h_i_s') . '.sql"');
            header('Content-Transfer-Encoding: binary');

            // start buffering output
            // it is not clear to me whether this needs to be done since the headers have already been set.
            // However in the PHP 'header' documentation (http://php.net/manual/en/function.header.php) it says that "Headers will only be accessible and output when a SAPI that supports them is in use."
            // rather than the possibility of falling through a real time window there seems to be no problem buffering the output anyway
            ob_start();
            $f_output = fopen("php://output", 'w');

            // put a few comments into the SQL file
            print("-- pjl SQL Dump\n");
            print("-- Server version:".$mysqli->server_info."\n");
            print("-- Generated: ".date('Y-m-d h:i:s')."\n");
            print('-- Current PHP version: '.phpversion()."\n");
            print('-- Host: '.$db_host."\n");
            print('-- Database:'.$db_name."\n");

            //get a list of all the tables
            $aTables = array();
            $strSQL = 'SHOW TABLES';            // I put the SQL into a variable for debuggin purposes - better that "check syntax near '), "
            if (!$res_tables = $mysqli->query($strSQL))
                throw new Exception("MySQL Error: " . $mysqli->error . 'SQL: '.$strSQL);

            while($row = $res_tables->fetch_array()) {
                $aTables[] = $row[0];
            }

            // Don't really need to do this (unless there is loads of data) since PHP will tidy up for us but I think it is better not to be sloppy
            // I don't do this at the end in case there is an Exception
            $res_tables->free();

            //now go through all the tables in the database
            foreach($aTables as $table)
            {
                print("-- --------------------------------------------------------\n");
                print("-- Structure for '". $table."'\n");
                print("--\n\n");

                // remove the table if it exists
                //  print('DROP TABLE IF EXISTS '.$table.';');

                // ask MySQL how to create the table
                $strSQL = 'SHOW CREATE TABLE '.$table;
                if (!$res_create = $mysqli->query($strSQL))
                    throw new Exception("MySQL Error: " . $mysqli->error . 'SQL: '.$strSQL);
                $row_create = $res_create->fetch_assoc();

                print("\n".$row_create['Create Table'].";\n");


                print("-- --------------------------------------------------------\n");
                print('-- Dump Data for `'. $table."`\n");
                print("--\n\n");
                $res_create->free();

                // get the data from the table
                $strSQL = 'SELECT * FROM '.$table;
                if (!$res_select = $mysqli->query($strSQL))
                    throw new Exception("MySQL Error: " . $mysqli->error . 'SQL: '.$strSQL);

                // get information about the fields
                $fields_info = $res_select->fetch_fields();

                // now we can go through every field/value pair.
                // for each field/value we build a string strFields/strValues
                while ($values = $res_select->fetch_assoc()) {

                    $strFields = '';
                    $strValues = '';
                    foreach ($fields_info as $field) {
                        if ($strFields != '') $strFields .= ',';
                        $strFields .= "`".$field->name."`";

                        // put quotes round everything - MYSQL will do type convertion (I hope) - also strip out any nasty characters
                        if ($strValues != '') $strValues .= ',';
                        $strValues .= '"'.preg_replace('/[^(\x20-\x7F)\x0A]*/','',$values[$field->name].'"');
                    }

                    // now we can put the values/fields into the insert command.
                    print("INSERT INTO ".$table." (".$strFields.") VALUES (".$strValues.");\n");
                }
                print("\n\n\n");

                $res_select->free();

            }


        } catch (Exception $e) {
            print($e->getMessage());
        }


        fclose($f_output);
        print(ob_get_clean());
        $mysqli->close();

        break;


    case 'view-email':

        $id = $routes['2'];

        $d = ORM::for_table('sys_email_logs')->find_one($id);
        if($d){

            $ui->assign('d',$d);
            $ui->display('view-email.tpl');

        }
        else{

        }


        break;


    case 'activity-ajax':

        $d = ORM::for_table('sys_logs')->order_by_desc('id')->limit(5)->find_many();
        $html = '';
        $df = $config['df'].' H:i:s';
        foreach($d as $ds){
            /*lpillon - ajuste para dar o load da url no sys_logs / 15_02_2017*/
            $html .= ' <li>
                                <a href="'.$ds['url'].'">
                                    <div>
                                        '.$ds['description'].'
                                        <span class="pull-right text-muted small">'.date( $df, strtotime($ds['date'])).'</span>
                                    </div>
                                </a>
                            </li>
                            <li class="divider"></li>';
        }

        $html .= '<li>
                                <div class="text-center link-block">
                                    <a href="'.U.'util/activity/">
                                        <strong>'.$_L['See All Activity'].' </strong>
                                       <i class="fa fa-angle-right"></i>
                                    </a>
                                </div>
                            </li>';
        echo $html;

        break;

    case 'terminal':


        $ui->assign('xheader',Asset::css(array('terminal/terminal')));
        $ui->assign('xfooter',Asset::js(array('terminal/terminal','terminal/ib')));
        $ui->display('terminal.tpl');


        break;

    case 'sys_status':

        $ui->assign('pinfo',Ib_System::info());

        $xjq = "function displayTime() {
    var time = moment().format('D MMMM YYYY H:mm:ss');
    $('#clock').html(time);
    setTimeout(displayTime, 1000);
}
 displayTime();";

        $ui->assign('xjq',$xjq);
        $ui->assign('app_stage',$_app_stage);

        $ui->display('util_sys_status.tpl');


        break;

    case 'sys_status_dl':


        $pdf = new Ib_Pdf();

        $pdf->from(Ib_System::info())->setFileName('server_info')->download();


        break;


    case 'integrationcode':


        $xheader = Asset::css(array('prism/prism'));
        $xfooter = Asset::js(array('prism/prism'));


        $ui->assign('xheader',$xheader);
        $ui->assign('xfooter',$xfooter);

        $s_client_login = '<form method="post" action="'.U.'client/auth/">
<input type="email" class="form-control" name="username" placeholder="'.$_L['Email Address'].'"/>
<input type="password" class="form-control" name="password" placeholder="'.$_L['Password'].'"/>
<button type="submit" class="btn btn-primary">Login</button>
</form>';

        $s_client_register = '<a href="'.U.'client/register/">'.$_L['Register'].'</a>';

        $form_client_login = htmlentities($s_client_login);
        $form_client_register = htmlentities($s_client_register);

        $ui->assign('form_client_login',$form_client_login);
        $ui->assign('form_client_register',$form_client_register);


        $ui->display('util_integrationcode.tpl');



        break;




    default:
        echo 'action not defined';
}